NVIDIA Cyberpunk 2077 features an unclocked GeForce RTX 4090 clocked at 2850 MHz.

The demo focuses on DLSS 3 efficiency

During the introduction of latest graphics playing cards based mostly on the Ada Lovelace structure, NVIDIA CEO Jensen Huang stated that their It reached 3 GHz on the GeForce RTX 40. Now, in a presentation to the worldwide press (through WCCFtech), the corporate a RTX 4090 Founders Edition clocked at 2850 MHz is in inventory. The configuration additionally had an Intel Core i9-12900K.

NVIDIA’s new high-end card was featured in Cyberpunk 2077 with 1440p, most graphics high quality and extremely ray tracing. According to WCCFtech, the sport with out DLSS and Reflex averaged 59 FPS and 49 FPS beneath 1%, with latency between 72-75 ms.

Thus, The RTX 4090 clocked at 2.8GHz, between 2810MHz and 2850MHz., at 100% GPU utilization and between 50 and 55°C. According to NVIDIA specs, the GPU increase frequency is 2520 MHz. So, on this demo, the RTX 4090 ran above 300 MHz with out overclocking.

After displaying off its high-end GPU operating Cyberpunk 2077, NVIDIA has activated DLSS 3, a pre-release model of the preset high quality. With this characteristic enabled, the RTX 4090 continued to run at 100% utilization and a couple of.8GHz, however with temperatures near 50°C.

productiveness elevated 59 FPS for an common of 170 FPS, backside 1% at 119 FPS and 53 ms latencies. The efficiency enchancment has virtually tripled. According to NVIDIA, DLSS 3 can ship as much as 4 instances greater efficiency than native decision, relying on the sport.

NVIDIA additionally detailed an concern that has been mentioned for the reason that first rumors: consumption. With the sport configured domestically The RTX 4090 reached an common consumption of 461 W. With DLSS 3 enabled, the cardboard’s consumption dropped to 348W, a discount of about 25%.

GeForce RTX 4090 efficiency

Cyberpunk 2077 1440p+max+RT Ultra NVIDIA GEFORCE RTX 4090 NVIDIA GEFORCE RTX 4090
DLSS 3 Disabled (native) On (high quality mode)
FPS (common) 59.9 170.7
FPS (down 1%) 49.3 119.6
FPS (minimal) 40.6 91.2
Latency (common) 75.4 ms 53.5 ms
GPU clock 2800-2850 MHz (inventory) 2800-2850 MHz (inventory)
GPU temperature 50-57С 50-53C
GPU energy 461.3 W 348.9 W

WCCFtech even carried out the identical check with MSI’s RTX 3090 Ti, with the graphics settings used to exhibit NVIDIA’s RTX 4090 in Cyberpunk 2077, aside from DLSS 3, after all, because it’s solely supported by the corporate. RTX 40. Instead of a brand new model, the location used DLSS 2.0, which is on the market to everybody within the sport (RTX 20 and RTX 30 homeowners, keep in mind this).

Cyberpunk 2077 Ultra Quality + Psycho RT (1440p Native):

  • MSI RTX 3090 TI SUPRIM X (Native/Stock 1440p) – 37 FPS / 455 W / ~75C
  • NVIDIA RTX 4090 FE (Native/Stock 1440p) – 60 FPS / 461 W / ~55C
  • RTX 4090 and RTX 3090 Ti = +62% sooner

Cyberpunk 2077 Ultra Quality + Psycho RT (1440p with DLSS):

  • MSI RTX 3090 Ti SUPRIM X (DLSS 2 1440p) – 61 FPS / 409 W / 74C
  • NVIDIA RTX 4090 FE (DLSS 3 1440p) – 170 FPS / 348 W / ~50C
  • RTX 4090 and RTX 3090 Ti = +178% sooner

The GeForce RTX 4090 will arrive on October twelfth with an MSRP of $1,599. Here, NVIDIA Brasil provides a worth of R$ 14,999.00.

NVIDIA shows off Marvel's Spider-Man Remastered running at 200+ FPS with DLSS 3.

NVIDIA reveals off Marvel’s Spider-Man Remastered operating at 200+ FPS with DLSS 3.
In addition to the RTX 4090 operating Overwatch 2 at over 400 FPS


Save on Black Friday

Source: WCCFtech


Leave a Comment